日本人牲交bbbxxxx,在线a片永久免费看无码不卡,欧美巨大xxxx做受l

聯系我們

18560023440

王經理：18560023440
地址：山東省德州市齊河縣經濟開發區齊眾大道7號-2車間

新聞資訊

保麗龍雕刻機教你如何控制雕刻效果模糊的情況

來源：http://m.qmsy.net 時間：2020-11-30

要保持好雕刻機的整潔，在每次雕刻機加工實現后要養成停機清理的好習性，這對機器本身就是一種很好的保護，雕刻機操作人員在日常生產工作過程中要標嚴格按照操作規則來使用機器，控制雕刻機的操作技巧。

First of all, we should keep the engraving machine clean and tidy. After each engraving machine is processed, we should develop a good habit of stopping and cleaning. This is a good protection for the machine itself. The carving machine operator should use the machine strictly according to the operation rules in the daily production process, and control the operation skills of the engraving machine.

特別是做雕刻的客戶更應當注重這方面的問題。雕刻機對雕刻的精度都要求比較高，假如雕刻機由于人為的因素出現問題而導致雕刻后果模糊那就得不償失了。

In particular, carving customers should pay more attention to this issue. Engraving machine on the accuracy of engraving are relatively high, if the engraving machine due to human factors caused by problems caused by carving fuzzy, it is not worth the loss.

其次，要常常檢查雕刻機刀具的磨損狀態，及時作出相應解決（更換或者修復）。假如雕刻機的刀具到了磨損較大的狀態還未改換，會導致雕刻進去的工件模糊不清尺寸不一，雕刻機的刀具到了須要改換的時候要及時交換新的刀具，防止由于刀具的起因形成雕刻后果不行，報廢材料。

Secondly, often check the engraving machine tool wear status, timely make the corresponding solution (replacement or repair). If the cutting tool of engraving machine has not been changed when it is worn out, it will cause the workpiece to be engraved blurred and the size is different. When the tool of engraving machine needs to be changed, it is necessary to exchange the new tool in time to prevent the engraving consequence caused by the cutter and report the waste material.

保麗龍雕刻機

另外，假如雕刻機雕刻進去的工件不清楚，還須要檢查一下雕刻機的雕刻路徑是否存在問題，這種狀態在實際操作工作常積攢經歷有很大的關聯，哪種雕刻效果應當選擇哪一種刀具，雕刻的深度在多少等等。這些問題都需求雕刻機操作員在實際中去操作和理解。

In addition, if the engraving machine engraving into the workpiece is not clear, it is also necessary to check whether there is a problem in the engraving path of the engraving machine. This state often accumulates experience in actual operation, which carving effect should be selected which kind of cutter, the depth of engraving and so on. These problems require engraving machine operators to operate and understand in practice.

檢查一下雕刻機齒條傳動的木工機上能否有殘留雜物；齒條上有沒有雜物，雕刻機主軸能否有空隙，這些狀態也會都會引起雕刻機雕刻后果模糊的狀態。還需要檢查雕刻機主軸的潤滑效果避免雕刻機運行到一半停住或卡死

Check whether there are residual debris on the woodworking machine driven by the rack of engraving machine; whether there are impurities on the rack and whether there is a gap in the main shaft of the engraving machine. These conditions will also cause the engraving machine to have fuzzy carving consequences. It is also necessary to check the lubrication effect of the engraving machine spindle, so as to avoid the engraving machine running to half stop or stuck